RL24 RL28 RL34
  • RL Home Page
  • RL 24
  • RL 28
  • RL 34
  • Status 580
  • "The Venture"
  • News and Events
  • Register of Owners
  • Discussion Forum
  • Buy and Sell
  • Surveys

  • The RL Story
  • Picture Gallery
  • Cruising in an RL
  • Bay to Bay Race
  • Links to Other Sites
  • Tips & Modifications
  • Personal Thoughts
  • RL24 Nationals
  • RL24 State Titles
  • RL24 Owners Assoc.
  • RL24 Hall of Fame
  • RL24 Asn Newsletters
  • RL24 Asn AGM Minutes
  • North American RL24's
    		•
    WWW.RLYACHTS.NET
    RL24, RL28, and RL34 Trailable Yachts
    from Rob Legg Yachts

    RL Yacht Owner's Discussion Forum
    Return to the Forum List

    Ezi Loader
    I have fitted the above and after a time the rubber rollers are distorting the hull-looks as though the springs are too strong for the hull cannot take the pressure and needs to be strengthened.
    Have contacted the manufacturer and he asked me to measure the diameter of the spring and in his opinion the current spring is too strong.
    I measured 11.5 mm for the existing spring (EG11)and he recommends a spring a full mm smaller-the EG10. Has anyone had experience with this? Thanks Peter

    Peter Brigg23-Feb-2021    Edit    Delete 
    Re: Ezi Loader
    The measurements are the diameter of the spring material. Looks like part EG 10 has a 10mm dia spring.
    Our thoughts are to go down two sizes to something like a 9mm diameter spring.
    Has anyone had experience with this?
    Thanks Peter
    Peter Brigg17-Jul-2020    Edit    Delete 

    Return to the Forum List       Add a message to this discussion
    admin