RL24 RL28 RL34
  • RL Home Page
  • RL 24
  • RL 28
  • RL 34
  • Status 580
  • "The Venture"
  • News and Events
  • Register of Owners
  • Discussion Forum
  • Buy and Sell
  • Surveys

  • The RL Story
  • Picture Gallery
  • Cruising in an RL
  • Bay to Bay Race
  • Links to Other Sites
  • Tips & Modifications
  • Personal Thoughts
  • RL24 Nationals
  • RL24 State Titles
  • RL24 Owners Assoc.
  • RL24 Hall of Fame
  • RL24 Asn Newsletters
  • RL24 Asn AGM Minutes
  • North American RL24's
    		•
    WWW.RLYACHTS.NET
    RL24, RL28, and RL34 Trailable Yachts
    from Rob Legg Yachts

    RL Yacht Owner's Discussion Forum
    Return to the Forum List

    Keel not lowering completely and keel position
    The keel of our RL28 Pendragon seems not to go down completely (at least in the cabin the 'stopper' on the hydraulic rod does not lower completely and sits about 5 cm above the fitting on the keel box where it normally used to rest. However, when I looked under water the keel did seem to be in the position as on the drawing in RL28 specifications (see http://www.rlyachts.net/specs28.asp)

    I have 2 questions:
    1) Does anyone bu chance know how to remedy this, and
    2) Does the drawing in RL28 specifications (see http://www.rlyachts.net/specs28.asp) show the keel in maximum lowered position?

    Cheers, Joost
    joost herweijer2-Feb-2019    Edit    Delete 

    Return to the Forum List       Add a message to this discussion
    admin