WWW.RLYACHTS.NET
RL24, RL28, and RL34 Trailable Yachts
from Rob Legg Yachts

RL Yacht Owner's Discussion Forum

Your Name:
Email Address:
Password: ( Needed to edit or delete this message.)
Message Title:
Text of Message:
Add an Image:
An image can also be attached to this listing. Click "Browse" to select the image file on your PC. It can be a JPEG or a GIF file. The file will be uploaded to the server, scaled to fit, and will appear beside the entry.


Replying to:bouyancy for a Mk1- how much is enough?
G'day, I've just cut out the original cockpit of our Mark 1 swing keel and replaced it with a new epoxy foam & balsa sandwich effort...not bad if I do say so myself, about 15kgs lighter,heaps stronger, bigger eskies, self draining and some enourmous storage space under the cockpit floor...heck we can even see over the cabin now! But I am wondering about bouancy..whats the recommended amount of litres of bouancy for a Mk1? I've got the original tank at the bow, and two large tanks at each side of the stern plus probably about 50l each - they go from hull skin to about 3/5th of the way to the deckline, 1/2 the quarter berths are filled with styrofoam, the coamings are filled with pour in foam probably, about 20l each and the foam sandwich materials which add up too about 200 l of foam/ balsa... That about it at this stage . I wonder if its enough?....There also appears to be a tank at the front of the v berth that has been cut open to take a 20 l water container- Its about 500mm wide - bow end to stern end...may be it was the orig water tank for the sink in fibre glass? It appears to have a std plastic bung in the top...